SEMI-CUSTOM, CENTRAL STATION AIR HANDLER

1,500 to 60,500 Nominal Cfm

39MN - Indoor 

39MW - Outdoor

Carrier’s Aero 39M air handlers provide advanced technology and custom features in a streamlined, easy to install package. Indoor and outdoor units are available to handle a wide variety of applications. Units can be equipped with HEPA filters, stainless steel quad-sloped drain pans, Agion® antimicrobial coating and other options. The 39M unit’s double-wall casing allows panels to be easily cleaned without damaging the insulation inside. Available fan options include forward-curved, airfoil, and plenum fans for extra quiet operation. Factory-installed controls maintain airflow and ventilation requirements while helping to prevent coil freeze-up, excessive humidity and poor indoor air quality (IAQ). Carrier’s AHUBuilder® software makes selecting and optimizing the 39M air handler easy.

 

Performance Features

- All units are shrink wrapped for complete protection while in transit

- Double skin panel construction, excellent heat preservation

- Thermal break casing construction

- Built-in integrated control system

- Chilled water, hot water, direct expansion (DX), and steam coils

- Ultraviolet band C (UV-C) germicidal lamps

- Multiple filtration from pleated to HEPA filters

- Energy recovery ventilator (ERV) sections

- Multiple fan options

- Humidifiers for precise indoor climate conditioning

- Internal and external face and bypass damper sections

Reliability Features

- HDP high durability polyester exterior panel

- Standard insulated, fully drainable, sloped drain pans in galvanized or stainless steel

Maintenance Features

- Prepainted unit exterior

- All service may be done through large, removable or hinged panels

- Marine lights and viewports for interior component inspection

Installation Features

- Units may be mounted in ceilings, closets, attics, etc.

- Variable frequency drives are programmed and started up at the factory

- Modular construction

- Casing can be broken-down to individual panels and frame members

DOCUMENTS

Factory-Installed Options

- Pre-filter

- Medium-efficiency filter

- HEPA filter

- Hot water coil

- Steam coil

- Electrical heater

- Various humidifiers

- Attenuator

- Heat recovery devices